$modinfo ixgbe filename: /lib/modules/3.11.10-100.fc18.x86_64/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.ko version: 3.13.10-k license: GPL description: Intel(R) 10 Gigabit PCI Express Network Driver author: Intel Corporation, srcversion: 1C9205E6E53789ABAFFAD0D alias: pci:v00008086d00001560sv*sd*bc*sc*i* alias: pci:v00008086d0000154Asv*sd*bc*sc*i* alias: pci:v00008086d00001557sv*sd*bc*sc*i* alias: pci:v00008086d0000154Fsv*sd*bc*sc*i* alias: pci:v00008086d0000154Dsv*sd*bc*sc*i* alias: pci:v00008086d00001528sv*sd*bc*sc*i* alias: pci:v00008086d000010F8sv*sd*bc*sc*i* alias: pci:v00008086d0000151Csv*sd*bc*sc*i* alias: pci:v00008086d00001529sv*sd*bc*sc*i* alias: pci:v00008086d0000152Asv*sd*bc*sc*i* alias: pci:v00008086d000010F9sv*sd*bc*sc*i* alias: pci:v00008086d00001514sv*sd*bc*sc*i* alias: pci:v00008086d00001507sv*sd*bc*sc*i* alias: pci:v00008086d000010FBsv*sd*bc*sc*i* alias: pci:v00008086d00001517sv*sd*bc*sc*i* alias: pci:v00008086d000010FCsv*sd*bc*sc*i* alias: pci:v00008086d000010F7sv*sd*bc*sc*i* alias: pci:v00008086d00001508sv*sd*bc*sc*i* alias: pci:v00008086d000010DBsv*sd*bc*sc*i* alias: pci:v00008086d000010F4sv*sd*bc*sc*i* alias: pci:v00008086d000010E1sv*sd*bc*sc*i* alias: pci:v00008086d000010F1sv*sd*bc*sc*i* alias: pci:v00008086d000010ECsv*sd*bc*sc*i* alias: pci:v00008086d000010DDsv*sd*bc*sc*i* alias: pci:v00008086d0000150Bsv*sd*bc*sc*i* alias: pci:v00008086d000010C8sv*sd*bc*sc*i* alias: pci:v00008086d000010C7sv*sd*bc*sc*i* alias: pci:v00008086d000010C6sv*sd*bc*sc*i* alias: pci:v00008086d000010B6sv*sd*bc*sc*i* depends: mdio,ptp,dca intree: Y vermagic: 3.11.10-100.fc18.x86_64 SMP mod_unload parm: max_vfs:Maximum number of virtual functions to allocate per physical function - default is zero and maximum value is 63 (uint) parm: allow_unsupported_sfp:Allow unsupported and untested SFP+ modules on 82599-based adapters (uint) parm: debug:Debug level (0=none,...,16=all) (int) $ethtool -c p2p1 Coalesce parameters for p2p1: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 1 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 $ethtool -k p2p1 Features for p2p1: rx-checksumming: on tx-checksumming: on tx-checksum-ipv4: on tx-checksum-ip-generic: off [fixed] tx-checksum-ipv6: on tx-checksum-fcoe-crc: on [fixed] tx-checksum-sctp: on scatter-gather: on tx-scatter-gather: on tx-scatter-gather-fraglist: off [fixed] tcp-segmentation-offload: on tx-tcp-segmentation: on tx-tcp-ecn-segmentation: off [fixed] tx-tcp6-segmentation: on udp-fragmentation-offload: off [fixed] generic-segmentation-offload: on generic-receive-offload: on large-receive-offload: off rx-vlan-offload: on tx-vlan-offload: on ntuple-filters: off receive-hashing: on highdma: on [fixed] rx-vlan-filter: on vlan-challenged: off [fixed] tx-lockless: off [fixed] netns-local: off [fixed] tx-gso-robust: off [fixed] tx-fcoe-segmentation: on [fixed] tx-gre-segmentation: off [fixed] tx-udp_tnl-segmentation: off [fixed] tx-mpls-segmentation: off [fixed] fcoe-mtu: off [fixed] tx-nocache-copy: on loopback: off [fixed] rx-fcs: off [fixed] rx-all: off tx-vlan-stag-hw-insert: off [fixed] rx-vlan-stag-hw-parse: off [fixed] rx-vlan-stag-filter: off [fixed]